Spring 2014 Class Schedule (SCC)



Back to Previous Page

EDT 300    Basic Technical Drafting    3 Units

Prerequisite: None.
Course Transferable to CSU
Hours: 36 hours LEC ; 54 hours LAB
Description: This is an introductory manual drafting course for design, architectural, and engineering students. Studies include drafting instrument care and use, sketching, scale reading, drafting conventions, lettering, orthographic and pictorial drawings, dimensioning techniques, sections, auxiliary views, and surface developments. The building design process is presented through an architectural design project. Students are required to provide their own drafting equipment.

Schedule: Eight Week - First, Jan 18-Mar 17
MW        10:00AM-12:05PM LEC J.Terry              SCC MAIN TEC 101         16813 
Textbook
MW        12:45PM-03:55PM LAB J.Terry              SCC MAIN TEC 101           
On-Campus

MW        12:45PM-03:55PM LAB M.Lechowick          SCC MAIN TEC 101           
On-Campus

MW        05:00PM-07:05PM LEC M.Lechowick          SCC MAIN TEC 101         16811 Textbook
MW        07:30PM-10:40PM LAB M.Lechowick          SCC MAIN TEC 101           
On-Campus


EDT 310    Computer Aided Drafting    3 Units

Prerequisite: EDT 300 with a grade of "C" or better; or equivalent; or concurrent enrollment in EDT 300.
Course Transferable to UC/CSU
Hours: 36 hours LEC ; 54 hours LAB
Description: This course is an introduction to computer-assisted drafting (CAD). Topics include, but are not limited to: Entity Editing; Linetypes; Layers; Entity Drawing; Object Snaps; Grips; Polylines; Dimensioning; Multilines; Pictorial Drawings; Program Customization; Drawing Plotting and Printing; Selection Sets and Blocks. Instruction is provided in the commands, application, techniques, standards and settings of CAD software to produce basic technical drawings that conform to current industry standards.

Schedule: Eight Week - Second, Mar 18-May 15
MW        05:00PM-07:05PM LEC H.Evans              SCC MAIN TEC 101         16400 
Textbook
MW        07:30PM-10:40PM LAB H.Evans              SCC MAIN TEC 101           
On-Campus


EDT 312    Intermediate Computer Aided Drafting    3 Units

Prerequisite: EDT 300 and EDT 310 with grades of "C" or better; or equivalent.
Course Transferable to UC/CSU
Hours: 36 hours LEC ; 54 hours LAB
Description: This is a second course in Computer Aided Drafting (CAD) that emphasizes advanced CAD commands. Topics include but are not limited to: File Management Techniques; CAD Layer Management; Geometric Calculator; Filters and Selection Sets; Dimensioning Settings; AutoCAD Customization; Toolbar and Menu Customization; Macros; POP Sections; Menugroups and Image Tile Menus; Preferences, Profiles; Advanced Plotting Techniques; Attributes; Scripts and Bill of Materials. This course offers in-service training and upward mobility training to the professional CAD drafter. Emphasis is on in-office related production skills and program customization.

Schedule: Eight Week - First, Jan 18-Mar 17
TTh       10:00AM-12:05PM LEC H.Evans              SCC MAIN TEC 103         18568 
Textbook
TTh       12:30PM-03:40PM LAB H.Evans              SCC MAIN TEC 101           
On-Campus


EDT 317    REVIT-MEP    3 Units

Prerequisite: EDT 300 with a grade of "C" or better; or equivalent. EDT 310 with grades of "C" or better; or equivalent.
Course Transferable to CSU
Hours: 36 hours LEC ; 54 hours LAB
Description: This course provides instruction in the AutoDesk software package REVIT MEP (Mechanical Electrical Plumbing). Topics covered include but are not limited to: Building Information Modeling (BIM), parametric 3D design tools for creating and analyzing HVAC, Plumbing and Piping systems, and Power, Lighting, and Signal systems.

Schedule: Full Term, Jan 18-May 21
TTh       07:30PM-08:20PM LEC K.Davis              SCC MAIN TEC 103         20003 
Textbook
TTh       08:30PM-09:50PM LAB K.Davis              SCC MAIN TEC 103           
On-Campus


EDT 332    Air Conditioning, Plumbing and Piping Design Documents    4 Units

Prerequisite: EDT 300 and EDT 310 with grades of "C" or better or equivalent.
Advisory: Concurrent enrollment in EDT 336. EDT 332 and 336 are designed so students will receive maximum benefit from both courses when they are taken concurrently.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 108 hours LAB
Description: This course provides instruction in the preparation of construction drawings and specifications for building HVAC, plumbing, and piping systems that meet building department and construction industry standards, using computer aided drafting programs. EDT 336 should be taken concurrently with this course.

Schedule: Full Term, Jan 18-May 21
T         06:30PM-07:20PM LEC K.Fitzpatrick        SCC MAIN TEC 101         20008 
Textbook
Th        05:00PM-05:50PM LEC K.Fitzpatrick        SCC MAIN TEC 101         20008 Textbook
Th        06:00PM-07:20PM LAB K.Fitzpatrick        SCC MAIN TEC 101           
TBA       TBA             LAB K.Fitzpatrick         TBA TBA                   
Hybrid Class. For more information, please contact Kenneth Fitzpatrick at http://www.scc.losrios.edu/~fitzpak.


EDT 336    Air Conditioning System Design    3 Units

Prerequisite: None.
Advisory: Concurrent enrollment in EDT 332.
Course Transferable to CSU, Green Course Green Course
Hours: 54 hours LEC
Description: This course focuses on the calculations of heat gain and heat loss in buildings, types of HVAC systems, equipment selection, ductwork design, building environmental comfort considerations, psychrometrics, and building temperature control systems. EDT 332 should be taken concurrently with this course.

Schedule: Full Term, Jan 18-May 21
T         05:00PM-06:20PM LEC K.Fitzpatrick        SCC MAIN TEC 101         20011 
Textbook
TBA       TBA             LEC K.Fitzpatrick         TBA TBA                 20011 Textbook
Hybrid Class. For more information, please contact Kenneth Fitzpatrick at http://www.scc.losrios.edu/~fitzpak.

Spring 2014 Class Schedule

Updated: June 11, 2014