Spring 2011 Class Schedule (SCC)



Back to Previous Page

MET 255    Mechanical Systems Maintenance    1.5 Units

Prerequisite: None.
Green Course Green Course
Hours: 27 hours LEC
Description: This course introduces the student to basic maintenance concepts for basic mechanical systems. Units of instruction include coil maintenance, filters management, indoor air quality, lubrication, belts and drives, verifying operation, monitoring equipment, and maintenance contracts. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Eight Week - Second, Mar 15-May 12
T         07:00PM-10:05PM LEC T.Kalber             SCC MAIN LAC 122         29638 
Textbook
On-Campus


MET 256    Fundamentals of Instruments and Electricity    1.5 Units

Prerequisite: None.
Hours: 27 hours LEC
Description: This course introduces the student to the fundamentals of electrical instruments and concepts required in commercial and industrial practice. Units of instruction include: fundamentals of electricity, ohms law, use of voltmeters, ammeters, ohmmeters, series and parallel circuits, wiring diagrams, and electro-magnetic theory. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
M         05:30PM-06:50PM LEC H.Ramil              SCC MAIN TEC 110         29034 
Textbook
M         08:30PM-09:50PM LEC J.Zeh                SCC MAIN LAC 122         24452 Textbook
On-Campus


MET 257    Fundamentals of Workplace Success    1.5 Units

Prerequisite: None.
Hours: 27 hours LEC
Description: This course provides the student with basic workplace skills needed to enter the workforce as a machinery systems technician. Units of instruction include teamwork, ethics, diversity, communication skills, writing e-mail messages, Internet websites, conflict resolution, critical thinking, problem solving, conflict resolution, career management, sexual harassment, and drug and alcohol use. Components of this course will be offered online. Students will be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
TBA       TBA             LEC G.Adams              SCC MAIN Online          25090 
Textbook
Online Class. Mandatory Orientation: Friday, January 21, 2011 from 5:30 pm - 6:50 pm, in TEC 105.


MET 351    Basic Mechanical Systems    5 Units

Prerequisite: None.
Advisory: MET 352 with a grade of "C" or better or concurrent enrollment in MET 352.
Course Transferable to CSU, Green Course Green Course
Hours: 54 hours LEC ; 108 hours LAB
Description: This course is designed to introduce the student to the theoretical and practical applications of basic mechanical systems utilized in refrigeration, heating, cooling, steam power generation, photovoltaic and hot water solar systems, and the treatment of water for use in mechanical systems, drinking water, and wastewater treatment plants. Additional studies include fundamental laws of heat; theory of refrigeration and refrigerants; installation, operation, and testing of refrigeration units; and safe, efficient use of related hand, heat, and power tools. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
TW        11:00AM-12:20PM LEC T.Kalber             SCC MAIN LAC 10          24408 
Textbook
TW        12:30PM-03:35PM LAB T.Kalber             SCC MAIN LAC 10            
On-Campus

TTh       05:30PM-06:50PM LEC J.Buonauro           SCC MAIN LAC 10          24412 Textbook
TTh       07:00PM-10:05PM LAB J.Buonauro           SCC MAIN LAC 10            
On-Campus


MET 352    Mechanical Systems Calculations    3 Units

Prerequisite: None.
Advisory: MET 351 with a grade of "C" or better or concurrent enrollment in MET 351.
General Education: AA/AS Area II(b)
Course Transferable to CSU
Hours: 54 hours LEC
Description: This course focuses on building mathematical skills specific to the mechanical-electrical trades; problem solving using metric (SI) units and English and metric unit conversions; solution of word problems involving length, area, volume, weight, strength of materials, work, power, energy, and efficiencies; exponents, scientific notation, and roots; problem solving using graphs and tables; algebraic solutions to applied problems; freehand sketching employing multiview, isometric, and oblique drawing methods; and lettering and dimensioning. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
MW        05:30PM-06:50PM LEC G.Adams              SCC MAIN TEC 105         24416 
Textbook
TBA       TBA             LEC TBA                   TBA TBA                 24416 Textbook
Hybrid Class. Mandatory Orientation on Wednesday, January 19, 2011 from 5:30 pm - 7:35 pm in TEC 105.

MW        07:00PM-08:20PM LEC G.Adams              SCC MAIN TEC 105         28620 Textbook
TBA       TBA             LEC TBA                   TBA TBA                 28620 Textbook
Hybrid Class. Mandatory Orientation on Wednesday, January 19, 2011 from 7:00 pm - 9:10pm in TEC 105.


MET 356    Wastewater Treatment Plant Operation and Maintenance I    3 Units

Prerequisite: None.
Advisory: MET 354 with a grade of "C" or better or concurrent enrollment in MET 354.
Course Transferable to CSU, Green Course Green Course
Hours: 54 hours LEC
Description: This is the first of three courses (see MET 366 and MET 376) that focus on water resources and their preservation; wastewater treatment systems and processes; system components; and related operation and safety practices. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
W         07:00PM-10:05PM LEC H.Ramil              SCC MAIN TEC 110         29508 
Textbook
On-Campus


MET 361    Refrigeration Systems    3 Units

Prerequisite: MET 351 with a grade of "C" or better
Advisory: MET 352 with a grade of "C" or better. Concurrent enrollment in MET 362, MET 363, and MET 364.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 54 hours LAB
Description: This is a course devoted to the study of residential and commercial refrigeration systems and equipment. Students learn about mechanical compression and absorption refrigeration devices; their operating characteristics, common applications and typical servicing procedures, and related safety practices. Hand tools, power tools, and test instruments are used by the student in lab to repair and service refrigeration devices. Students gain additional experience by analyzing system performance with pressure-enthalpy diagrams. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
M         05:15PM-07:20PM LEC T.Kalber             SCC MAIN LAC 10          24438 
Textbook
M         07:30PM-10:45PM LAB T.Kalber             SCC MAIN LAC 10            
On-Campus


MET 362    Refrigeration Systems Calculations    3 Units

Prerequisite: MET 351 and 352 with grades of "C" or better
Advisory: MET 361, MET 363, and MET 364 with a grade of "C" or better or concurrent enrollment in MET 361, MET 363, and MET 364.
Course Transferable to CSU, Green Course Green Course
Hours: 54 hours LEC
Description: This course focuses on mathematical problems involving English and metric (SI) units concerned with installation, operations, and maintenance of commercial and industrial refrigeration systems. Emphasis will be placed on basic heat transfer, loads, piping, equipment performance, and economic factors. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
TW        05:30PM-06:50PM LEC T.Kalber             SCC MAIN LAC 122         24442 
Textbook
On-Campus


MET 363    Refrigerant Transition and Recovery Processes and Procedures    1.5 Units

Prerequisite: MET 351 with a grade of "C" or better
Advisory: MET 361, MET 362, and MET 364 with a grade of "C" or better or concurrent enrollment in MET 361, MET 362, and MET 364.
Course Transferable to CSU, Green Course Green Course
Hours: 27 hours LEC
Description: This course focuses on the recovery and recycling of existing refrigerants, the transition to environmentally safe refrigerants, and the preparation for certification testing in refrigerant handling as mandated by the Clean Air Act, 40 CFR, part 82, subpart F and regulated by the Environmental Protection Agency (EPA). Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Eight Week - First, Jan 15-Mar 14
T         07:00PM-10:05PM LEC T.Kalber             SCC MAIN LAC 122         27496 
Textbook
On-Campus


MET 364    Electrical Controls    3 Units

Prerequisite: MET 256, 351, and 352 with grades of "C" or better
Advisory: MET 361, MET 362, and MET 363 with a grade of "C" or better or concurrent enrollment in MET 361, MET 362, and MET 363.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 54 hours LAB
Description: This course is an introduction to power and control circuits and devices used with refrigeration, heating, cooling, pumping, water treating, photovoltaic, and hot water solar heating mechanical systems. Units of instruction include a study of electron theory, magnetism, induction, alternating current, direct current, resistance, and capacitance. Practice using electrical meters and test instruments in laboratory classes along with related safety practices will also be covered. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
Th        05:15PM-07:05PM LEC T.Kalber             SCC MAIN LAC 122         24444 
Textbook
Th        07:15PM-10:20PM LAB T.Kalber             SCC MAIN LAC 116           
On-Campus


MET 368    Heat Pump Operation and Maintenance    3 Units

Prerequisite: MET 256, 351, and 352 with grades of "C" or better
Course Transferable to CSU, Green Course Green Course
Hours: 54 hours LEC
Description: This course provides instruction in basic refrigeration and heat pump theory, cooling and heating cycles, defrost cycles, controls, supplemental heat, flow control devices, and heat load calculations. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
W         07:00PM-10:05PM LEC T.Kalber             SCC MAIN LAC 122         30223 
Textbook
On-Campus


MET 371    Heating and Power Machinery    3 Units

Prerequisite: MET 255, 361, and 364 with grades of "C" or better
Advisory: MET 372, MET 373, and MET 374 with a grade of "C" or better or concurrent enrollment in MET 372, MET 373, and MET 374.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 54 hours LAB
Description: This course provides instruction in warm air furnaces, hydronic heating, hot water solar systems, and steam and power plant systems. Instruction includes pumps, pumping head calculations, combustion principles, steam and hot water boilers, warm air furnaces, boiler safety and operating controls, and boiler emissions. Laboratory activities include operation, testing, maintenance, and troubleshooting of warm air furnaces and steam/hot water heating systems. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
T         05:15PM-07:05PM LEC J.Zeh                SCC MAIN LAC 116         26382 
Textbook
T         07:15PM-10:20PM LAB J.Zeh                SCC MAIN LAC 116           
On-Campus


MET 372    Power Machinery, Heating and Air Conditioning Calculations    3 Units

Prerequisite: MET 361 and 362 with grades of "C" or better
Advisory: MET 371, MET 373, and MET 374 with a grade of "C" or better or concurrent enrollment in MET 371, MET 373, and MET 374.
Course Transferable to CSU, Green Course Green Course
Hours: 54 hours LEC
Description: This course focuses on mathematical problems involving English and metric (SI) units concerned with installation, operation, and maintenance of power machinery, and heating and air conditioning systems. Emphasis will be placed on heat transfer, heating/cooling loads, pipe and pump sizing, steam and hot water system performance, psychrometrics, and duct sizing calculations. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
M         05:15PM-08:20PM LEC J.Zeh                SCC MAIN LAC 122         30225 
Textbook
On-Campus


MET 373    Piping, Electrical, and Sheet Metal Drafting    3 Units

Prerequisite: MET 255, 361, and 364 with grades of "C" or better
Advisory: MET 371, MET 372, and MET 374 with a grade of "C" or better or concurrent enrollment in MET 371, MET 372, and MET 374.
Course Transferable to CSU
Hours: 36 hours LEC ; 54 hours LAB
Description: This course provides instruction in the design and construction of mechanical and piping systems. Units of instruction include mechanical and plumbing codes, basic sketching techniques, recognition of standard symbols, computer aided drawing applications, and construction terms and specifications. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
Th        05:15PM-07:05PM LEC J.Zeh                SCC MAIN LAC 116         30226 
Textbook
Th        07:15PM-10:20PM LAB J.Zeh                SCC MAIN LAC 116           
On-Campus


MET 374    Automatic Control Systems I    3 Units

Prerequisite: MET 361 and 364 with grades of "C" or better
Advisory: MET 371, MET 372, and MET 373 with a grade of "C" or better or concurrent enrollment in MET 371, MET 372, and MET 373.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 54 hours LAB
Description: This is the first of two courses (see MET 384) that focus on the study of controls and devices used in heating, ventilation, air conditioning, pumping, water treatment, and manufacturing systems. Units of instruction include introduction to control theory, final controls devices, and pneumatic control systems. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
W         05:15PM-07:05PM LEC M.Hamilton           SCC MAIN LAC 9           27386 
Textbook
W         07:15PM-10:20PM LAB M.Hamilton           SCC MAIN LAC 9             
On-Campus


MET 376    Wastewater Treatment Plant Operation and Maintenance III    3 Units

Prerequisite: MET 366 with a grade of "C" or better
Course Transferable to CSU, Green Course Green Course
Hours: 54 hours LEC
Description: This is the third of three courses (see MET 356 and MET 366) that focus on water resources and their preservation; wastewater treatment systems and processes; system components; related operation and safety practices. The emphasis of this course is on larger secondary and tertiary wastewater treatment facilities. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
Th        05:30PM-08:35PM LEC H.Ramil              SCC MAIN TEC 110         30229 
Textbook
On-Campus


MET 381    Air Conditioning    3 Units

Prerequisite: MET 371 and 372 with grades of "C" or better
Advisory: MET 382, MET 383, and MET 384 with a grade of "C" or better or concurrent enrollment in MET 382, MET 383, and MET 384.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 54 hours LAB
Description: This course provides instruction in the design, operation, and maintenance of commercial and industrial air conditioning systems. Instruction includes study of air distribution, variable air volume systems, refrigeration compressors, absorption air condition systems, helical-rotary and centrifugal water chillers, chilled water systems, thermal storage, cooling towers, photovoltaic and hot water solar systems, and energy management. Students will gain practical experience by operating commercial air conditioning systems. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
W         05:15PM-07:05PM LEC J.Zeh                SCC MAIN LAC 116         27502 
Textbook
W         07:15PM-10:20PM LAB J.Zeh                SCC MAIN LAC 116           
On-Campus


MET 383    Instrumentation    3 Units

Prerequisite: MET 361 and 364 with grades of "C" or better
Advisory: MET 381, MET 382, and MET 384 with a grade of "C" or better or concurrent enrollment in MET 381, MET 382, and MET 384.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 54 hours LAB
Description: This course provides instruction in the theory and practice of using instruments for testing and analyzing the operation of refrigerating, air conditioning, mechanical, electrical, and building systems. Units of instruction include a study of measurement principles including temperature, humidity, flow, light, sound, velocity, pressure, combustion emissions, air quality, voltage, level, force, and vibration. Laboratory activities will emphasize the practical applications of sensors and measuring instruments. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
M         05:15PM-07:05PM LEC M.Hamilton           SCC MAIN LAC 9           27794 
Textbook
M         07:15PM-10:20PM LAB M.Hamilton           SCC MAIN LAC 9             
On-Campus


MET 384    Automatic Control Systems II    3 Units

Prerequisite: MET 371 and 374 with grades of "C" or better
Advisory: MET 381, MET 382, and MET 383 with a grade of "C" or better or concurrent enrollment in MET 381, MET 382, and MET 383.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 54 hours LAB
Description: This is the second of two courses (see MET 374) that focus on the study of controls and devices used in heating, ventilation, air conditioning, pumping, water treatment, and manufacturing systems. Units of instruction include electronic and direct digital controls, networks, interoperable systems, and programming of controllers. Components of this course may be offered online. Students may be required to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Jan 15-May 18
T         05:15PM-07:05PM LEC M.Hamilton           SCC MAIN LAC 9           24448 
Textbook
T         07:15PM-10:20PM LAB M.Hamilton           SCC MAIN LAC 9             
On-Campus

Spring 2011 Class Schedule

Updated: May 12, 2011