Fall 2018 Class Schedule (SCC)



Back to Previous Page

MET 255    Mechanical Systems Maintenance    1.5 Units

Prerequisite: MET 351 with a grade of "C" or better
Green Course Green Course
Hours: 27 hours LEC
Description: This course introduces the student to maintenance concepts for basic mechanical systems. Units of instruction include coil maintenance, filter management, indoor air quality, lubrication, belts and drives, verifying operation, monitoring equipment, and maintenance contracts. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

W02:40PM-04:00PMLECB.PrudhelSCC MAIN LUC 116A20690Textbook
On-Campus

Schedule: Other Term, Oct 18-Dec 14

M07:00PM-10:30PMLECM.EstradaSCC MAIN LUC 12220691Textbook
On-Campus


MET 256    Fundamentals of Instruments and Electricity    1.5 Units

Prerequisite: MET 250 with a grade of "C" or better
Advisory: MET 257, MET 351 and MET 352 with a grade of "C" or better or concurrent enrollment in MET 257, MET 351 and MET 352.
Hours: 27 hours LEC
Description: This course introduces the student to the fundamentals of electrical instruments and concepts required in commercial and industrial practice. Units of instruction include: fundamentals of electricity, Ohms law, use of voltmeters, ammeters, ohmmeters, series and parallel circuits, wiring diagrams, and electromagnetic theory. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

M01:00PM-02:30PMLECL.JensenSCC MAIN LUC 116A18827Textbook
M02:40PM-04:10PMLECL.JensenSCC MAIN LUC 116A17643Textbook
M05:15PM-06:45PMLECL.JensenSCC MAIN LUC 116A16793Textbook
Students new to the MET Program are required to take the program pre-requisite course MET 250, "Introduction to Mechanical Electrical Technology". Two sections of this course are offered in Summer 2018. (see Summer 2018 Class Schedule for additional information).
On-Campus


MET 257    Fundamentals of Workplace Success    1.5 Units

Prerequisite: MET 250 with a grade of "C" or better
Advisory: MET 256, MET 351 and MET 352 with a grade of "C" or better or concurrent enrollment in MET 256, MET 351 and MET 352.
Hours: 27 hours LEC
Description: This course provides the student with basic workplace skills needed to enter the workforce as a machinery systems technician. Units of instruction include teamwork, ethics, diversity, communication skills, writing e-mail messages, Internet websites, conflict resolution, critical thinking, problem solving, conflict resolution, career management, sexual harassment, and drug and alcohol use. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

W01:00PM-02:20PMLECR.GentrySCC MAIN LUC 116A16978Textbook
F05:15PM-06:40PMLECB.PrudhelSCC MAIN TEC 10518828Textbook
Students new to the MET Program are required to take the program pre-requisite course MET 250, "Introduction to Mechanical Electrical Technology". Two sections of this course are offered in Summer 2018. (see Summer 2018 Class Schedule for additional information).
On-Campus


MET 295    Independent Studies in Mechanical - Electrical Technology    1-3 Units

Prerequisite: None.
Hours: 162 hours LAB
Description: This course is designed to provide student's additional on-hands experience in the Mechanical Electrical Technology related disciplines. To be eligible for independent study, students must be currently enrolled in at least one Mechanical-Electrical Technology course. They must also discuss the study with a professor in this subject and secure approval.

Schedule: Full Term, Aug 25-Dec 20

TBATBALABR.Gentry TBA TBA18829Textbook
Instructor's consent is required to enroll.
3 Units
On-Campus


MET 351    Basic Mechanical Systems    5 Units

Prerequisite: MET 250 with a grade of "C" or better
Advisory: MET 256, MET 257 and MET 352 with a grade of "C" or better or concurrent enrollment in MET 256, MET 257 and MET 352.
Course Transferable to CSU, Green Course Green Course
Hours: 54 hours LEC ; 108 hours LAB
Description: This course is designed to introduce the student to the theoretical and practical applications of basic mechanical systems utilized in heating, ventilation, air conditioning, refrigeration, steam power generation, and the treatment of water for use in mechanical systems. Additional studies include fundamental laws of heat; theory of refrigeration and refrigerants; installation, operation, and testing of refrigeration units; and safe, efficient use of related hand, heat, and power tools. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

TTh10:40AM-12:00PMLECB.PrudhelSCC MAIN LUC 1016769Textbook
TTh01:00PM-04:05PMLABB.PrudhelSCC MAIN LUC 10
Students new to the MET Program are required to take the program pre-requisite course MET 250, "Introduction to Mechanical Electrical Technology". Two sections of this course are offered in Summer 2018. (see Summer 2018 Class Schedule for additional information).
On-Campus

TTh05:15PM-06:35PMLECJ.BuonauroSCC MAIN LUC 1016771Textbook
TTh07:00PM-10:05PMLABJ.BuonauroSCC MAIN LUC 10
Students new to the MET Program are required to take the program pre-requisite course MET 250, "Introduction to Mechanical Electrical Technology". Two sections of this course are offered in Summer 2018. (see Summer 2018 Class Schedule for additional information).
On-Campus


MET 352    Mechanical Systems Calculations    3 Units

Prerequisite: MET 250 with a grade of "C" or better
Advisory: MET 256, MET 257 and MET 351 with a grade of "C" or better or concurrent enrollment in MET 256, MET 257 and MET 351.
General Education: AA/AS Area II(b)
Course Transferable to CSU
Hours: 54 hours LEC
Description: This course focuses on building mathematical skills specific to the mechanical-electrical trades; problem solving using metric (SI) units and English and metric unit conversions; solution of word problems involving length, area, volume, weight, strength of materials, work, power, energy, and efficiencies; exponents, scientific notation, and roots; problem solving using graphs and tables; algebraic solutions to applied problems; freehand sketching employing multiview, isometric, and oblique drawing methods; and lettering and dimensioning. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

MW10:40AM-12:00PMLECR.GentrySCC MAIN LUC 116A18830Textbook
MW05:15PM-06:35PMLECR.GentrySCC MAIN TEC 10516773Textbook
MW07:00PM-08:20PMLECR.GentrySCC MAIN TEC 10516774Textbook
Students new to the MET Program are required to take the program pre-requisite course MET 250, "Introduction to Mechanical Electrical Technology". Two sections of this course are offered in Summer 2018. (see Summer 2018 Class Schedule for additional information).
On-Campus


MET 361    Refrigeration Systems    3 Units

Prerequisite: MET 351 with a grade of "C" or better
Advisory: MET 352 with a grade of "C" or better. Concurrent enrollment in MET 362, MET 363, and MET 364.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 54 hours LAB
Description: This course is devoted to the study of residential and commercial refrigeration systems and equipment. Students learn about mechanical compression and refrigeration devices: their operating characteristics, common applications and typical servicing procedures, and related safety practices. Hand tools, power tools, and test instruments are used by the student in lab to repair and service refrigeration devices. Students gain additional experience by analyzing system performance with pressure-enthalpy diagrams. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

W05:15PM-07:05PMLECJ.BuonauroSCC MAIN LUC 1016786Textbook
W07:15PM-10:20PMLABJ.BuonauroSCC MAIN LUC 10
On-Campus


MET 362    Refrigeration Systems Calculations    3 Units

Prerequisite: MET 351 and 352 with grades of "C" or better
Advisory: MET 361, MET 363, and MET 364 with a grade of "C" or better or concurrent enrollment in MET 361, MET 363, and MET 364.
Course Transferable to CSU, Green Course Green Course
Hours: 54 hours LEC
Description: This course focuses on mathematical problems involving English and metric (SI) units concerned with installation, operations, and maintenance of commercial and industrial refrigeration systems. Emphasis will be placed on basic heat transfer, loads, piping, equipment performance, and economic factors. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

MT05:15PM-06:40PMLECB.AldabeSCC MAIN LUC 12216788Textbook
On-Campus


MET 363    Refrigerant Transition and Recovery Processes and Procedures    1.5 Units

Prerequisite: MET 351 with a grade of "C" or better
Advisory: MET 361, MET 362, and MET 364 with a grade of "C" or better or concurrent enrollment in MET 361, MET 362, and MET 364.
Course Transferable to CSU, Green Course Green Course
Hours: 27 hours LEC
Description: This course focuses on the recovery and recycling of existing refrigerants, the transition to environmentally safe refrigerants, and the preparation for certification testing in refrigerant handling as mandated by the Clean Air Act, 40 CFR, part 82, subpart F and regulated by the Environmental Protection Agency (EPA). Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Eight Week - First, Aug 25-Oct 17

M07:00PM-10:20PMLECM.EstradaSCC MAIN LUC 12218121Textbook
On-Campus


MET 364    Electrical Controls    3 Units

Prerequisite: MET 256, 351, and 352 with grades of "C" or better
Advisory: MET 361, MET 362, and MET 363 with a grade of "C" or better or concurrent enrollment in MET 361, MET 362, and MET 363.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 54 hours LAB
Description: This course provides instruction in power and control circuits and devices used with refrigeration, heating, cooling, and pumping mechanical systems. Units of instruction include a study of electron theory, magnetism, induction, alternating current, direct current, resistance, and capacitance. Students will practice using electrical meters and test instruments in the laboratory. Electrical safety practices will also be covered. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

Th05:15PM-07:05PMLECR.GentrySCC MAIN LUC 12216789Textbook
Th07:15PM-10:20PMLABR.GentrySCC MAIN LUC 116
On-Campus


MET 368    Heat Pump Operation and Maintenance    3 Units

Prerequisite: MET 256, 351, and 352 with grades of "C" or better
Course Transferable to CSU, Green Course Green Course
Hours: 54 hours LEC
Description: This course provides instruction in basic refrigeration and heat pump theory, cooling and heating cycles, defrost cycles, controls, supplemental heat, flow control devices, and heat load calculations. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

T07:00PM-10:05PMLECR.GentrySCC MAIN LUC 12217668Textbook
On-Campus


MET 371    Heating and Power Machinery    3 Units

Prerequisite: MET 255, 361, and 364 with grades of "C" or better
Advisory: MET 372, MET 373, and MET 374 with a grade of "C" or better or concurrent enrollment in MET 372, MET 373, and MET 374.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 54 hours LAB
Description: This course provides instruction on warm air furnaces, hydronic heating, hot water solar systems, and steam and power plant systems. Instruction includes pumps, pumping head calculations, combustion principles, steam and hot water boilers, warm air furnaces, boiler safety and operating controls, and boiler emissions. Laboratory activities include operation, testing, maintenance, and troubleshooting of warm air furnaces and steam/hot water heating systems. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

T05:15PM-07:05PMLECJ.ZehSCC MAIN LUC 116A17257Textbook
T07:15PM-10:20PMLABJ.ZehSCC MAIN LUC 116
On-Campus


MET 372    Power Machinery, Heating and Air Conditioning Calculations    3 Units

Prerequisite: MET 361 and 362 with grades of "C" or better
Advisory: MET 371, MET 373, and MET 374 with a grade of "C" or better or concurrent enrollment in MET 371, MET 373, and MET 374.
Course Transferable to CSU, Green Course Green Course
Hours: 54 hours LEC
Description: This course focuses on mathematical problems involving English and metric (SI) units concerned with installation, operation, and maintenance of power machinery, and heating and air conditioning systems. Emphasis will be placed on heat transfer, heating and cooling loads, pipe and pump sizing, steam and hot water system performance, psychrometrics, and duct sizing calculations. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

M07:00PM-10:25PMLECJ.JohnSCC MAIN LUC 116A17259Textbook
On-Campus


MET 373    Piping, Electrical, and Sheet Metal Drafting    3 Units

Prerequisite: MET 255, 361, and 364 with grades of "C" or better
Advisory: MET 371, MET 372, and MET 374 with a grade of "C" or better or concurrent enrollment in MET 371, MET 372, and MET 374.
Course Transferable to CSU
Hours: 36 hours LEC ; 54 hours LAB
Description: This course provides instruction in the design and construction of mechanical and piping systems. Units of instruction include mechanical and plumbing codes, basic sketching techniques, recognition of standard symbols, computer aided drawing applications, and construction terms and specifications. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

Th05:15PM-07:05PMLECB.AldabeSCC MAIN LUC 116A17260Textbook
Th07:15PM-10:20PMLABB.AldabeSCC MAIN LUC 116A
On-Campus


MET 374    Automatic Control Systems I    3 Units

Prerequisite: MET 361 and 364 with grades of "C" or better
Advisory: MET 371, MET 372, and MET 373 with a grade of "C" or better or concurrent enrollment in MET 371, MET 372, and MET 373.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 54 hours LAB
Description: This is the first of two courses (see MET 384) that focus on the study of controls and devices used in heating, ventilation, air conditioning, pumping, water treatment, and manufacturing systems. Units of instruction include introduction to control theory, final control devices, and pneumatic control systems. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

W05:15PM-07:05PMLECB.PrudhelSCC MAIN LUC 917525Textbook
W07:15PM-10:20PMLABB.PrudhelSCC MAIN LUC 9
On-Campus


MET 381    Air Conditioning    3 Units

Prerequisite: MET 371 and 372 with grades of "C" or better
Advisory: MET 382, MET 383, and MET 384 with a grade of "C" or better or concurrent enrollment in MET 382, MET 383, and MET 384.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 54 hours LAB
Description: This course provides instruction in the design, operation, and maintenance of commercial and industrial air conditioning systems. Instruction includes study of air distribution, variable air volume systems, refrigeration compressors, absorption air conditioning systems, helical-rotary and centrifugal water chillers, chilled water systems, thermal storage, cooling towers, photovoltaic and hot water solar systems, and energy management. Students will gain practical experience by operating commercial air conditioning systems. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

W05:15PM-07:05PMLECM.EstradaSCC MAIN LUC 116A17706Textbook
W07:15PM-10:20PMLABM.EstradaSCC MAIN LUC 116
On-Campus


MET 383    Instrumentation    3 Units

Prerequisite: MET 371, 372, 373, and 374 with grades of "C" or better
Advisory: MET 381, MET 382, and MET 384 with grades of "C" or better or concurrent enrollment in MET 381, MET 382, and MET 384.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 54 hours LAB
Description: This course provides instruction in the theory and practice of using instruments for testing and analyzing the operation of refrigerating, air conditioning, mechanical, electrical, and building systems. Units of instruction include a study of measurement principles including temperature, humidity, flow, light, sound, velocity, pressure, combustion emissions, air quality, voltage, level, force, and vibration. Laboratory activities will emphasize the practical applications of sensors and measuring instruments. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

M08:25PM-10:30PMLECJ.BuonauroSCC MAIN LUC 917755Textbook
M05:00PM-08:15PMLABJ.BuonauroSCC MAIN LUC 9
On-Campus


MET 384    Automatic Control Systems II    3 Units

Prerequisite: MET 371 and 374 with grades of "C" or better
Advisory: MET 381, MET 382, and MET 383 with a grade of "C" or better or concurrent enrollment in MET 381, MET 382, and MET 383.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 54 hours LAB
Description: This is the second of two courses (see MET 374) that focus on the study of controls and devices used in heating, ventilation, air conditioning, pumping, water treatment, and manufacturing systems. Units of instruction include electronic and direct digital controls, networks, interoperable systems, and programming of controllers. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

Schedule: Full Term, Aug 25-Dec 20

T05:15PM-07:05PMLECB.PrudhelSCC MAIN LUC 916791Textbook
T07:15PM-10:20PMLABB.PrudhelSCC MAIN LUC 9
On-Campus


MET 495    Independent Studies in Mechanical-Electrical Technology    1-3 Units

Prerequisite: None.
Course Transferable to CSU
Hours: 162 hours LAB
Description: Independent Study is an opportunity for the student to extend classroom experience in this subject, while working independently of a formal classroom situation. Independent study is an extension of work offered in a specific class in the college catalog. To be eligible for independent study, students must have completed the basic regular catalog course at Sacramento City College. They must also discuss the study with a professor in this subject and secure approval. Only one independent study for each catalog course will be allowed.

Schedule: Full Term, Aug 25-Dec 20

TBATBALABJ.Zeh TBA TBA18176Textbook
Instructor's consent is required to enroll.
3 Units
On-Campus

Fall 2018 Class Schedule

Updated: July 20, 2018