Fall 2010 Class Schedule (SCC)



Back to Previous Page

EDT 300    Basic Technical Drafting    3 Units

Same As: ENGR 306
Prerequisite: None.
Course Transferable to CSU
Hours: 36 hours LEC ; 54 hours LAB
Description: This is the first course in drafting for drafting, architectural, and engineering students. Studies include drafting instrument care and use, sketching, scale reading, drafting conventions, lettering, orthographic and pictorial drawings, dimensioning techniques, sections, auxiliary views, surface developments, topographics, and working drawing development. Credit may be earned for EDT 300 or ENGR 306, but not for both. Students are required to provide their own drafting equipment.

Schedule: Full Term, Aug 21-Dec 16
TTh       02:00PM-02:50PM LEC P.Finley             SCC MAIN TEC 101         25906 
Textbook
TTh       03:00PM-04:20PM LAB P.Finley             SCC MAIN TEC 101           
On-Campus

MW        05:00PM-05:50PM LEC C.Yost               SCC MAIN TEC 101         25898 Textbook
MW        06:00PM-07:20PM LAB C.Yost               SCC MAIN TEC 101           
On-Campus


EDT 310    Computer Aided Drafting    3 Units

Prerequisite: None.
Advisory: EDT 300 with a grade of "C" or better or equivalent
Course Transferable to CSU
Hours: 36 hours LEC ; 54 hours LAB
Description: This course is an introduction to computer-assisted drafting (CAD). It covers orthographic and isometric projection concepts. CAD topics include, but are not limited to: Entity Editing; Linetypes; Layers; Entity Drawing; Object Snaps; Grips; Polylines; Dimensioning; Multilines; Pictorial Drawings; Program Customization; Drawing Plotting - Plotters and Printing; Selection Sets and Blocks. Instruction is provided in the commands, application, techniques, standards and settings of CAD software to produce basic technical drawings that conform to current industry standards. A lecture/lab format is used to develop student comprehension of CAD software and to develop appropriate skills required to operate the software in a professional manner in the production of Architectural and Engineering related drawings. This course may be taken two times for credit provided that the software version has changed.

Schedule: Full Term, Aug 21-Dec 16
Sa        08:00AM-09:40AM LEC K.Fitzpatrick        SCC MAIN TEC 101         24278 
Textbook
Sa        10:00AM-01:05PM LAB K.Fitzpatrick        SCC MAIN TEC 101           
On-Campus

TTh       11:00AM-11:50AM LEC P.Finley             SCC MAIN TEC 103         29154 Textbook
TTh       12:00PM-01:20PM LAB P.Finley             SCC MAIN TEC 103           
On-Campus

MW        07:30PM-08:20PM LEC H.Evans              SCC MAIN TEC 101         24282 Textbook
MW        08:30PM-09:50PM LAB H.Evans              SCC MAIN TEC 101           
On-Campus


EDT 312    Intermediate Computer Aided Drafting    3 Units

Prerequisite: EDT 310 with a grade of "C" or better or equivalent.
Course Transferable to CSU
Hours: 36 hours LEC ; 54 hours LAB
Description: This is a second course in Computer Aided Drafting (CAD) that emphasizes advanced CAD commands and design graphics drawing principles and helps develop job-applicable speed and competence on AutoCAD software. Topics include but are not limited to: Windows Explorer; Paths and Filenames, Directory Structures; CAD Layering Standards; Floor Plans: Limits, Layers, Scale Factors; Drawing Sheet Sizes; Limits; Zoom xP; AutoCAD Geometric Calculator; AutoCAD Filters and Selection Sets; Architectural Dimension settings; AutoCAD Customization; Command Aliases; Toolbar and Menu Customization; Macros; POP Sections; Menugroups /Image Tile Menus; Preferences/Profiles/Advanced Plotting Techniques; Attributes; Scripts and Bill of Materials. This course offers in-service training and upward mobility training to the professional CAD drafter. Emphasis is on in-office related production skills and program customization. This course may be taken two times for credit, provided that the software version has changed.

Schedule: Full Term, Aug 21-Dec 16
TTh       05:00PM-05:50PM LEC P.Finley             SCC MAIN TEC 103         24288 
Textbook
TTh       06:00PM-07:20PM LAB P.Finley             SCC MAIN TEC 103           
On-Campus


EDT 314    Advanced Computer Assisted Drafting and Design    2 Units

Prerequisite: EDT 310 with a grade of "C" or better
Course Transferable to CSU
Hours: 18 hours LEC ; 54 hours LAB
Description: This course covers advanced study in computer aided drafting with emphasis on construction related topics. Course subject areas include basic three-dimensional studies, pictorial (isometric) and three dimensional drawings and dimensioning; customization using the AutoLISP programming language; use of database application to integrate drawing and schedule information in project drawing sets; 3D and UCS Coordinate Systems; Spherical and Cylindrical Coordinates; Solids and Primitives; Solid Model Editing 3D Objects; Wireframes; 3D Faces, Rendering; Light Sources and Backgrounds; Raster and PostScript Files, and applications of CAD to drawing development. The concepts also relate to other computer drafting applications. This course may be taken two times for credit provided that the software version has changed.

Schedule: Full Term, Aug 21-Dec 16
TTh       07:30PM-08:00PM LEC K.Davis              SCC MAIN TEC 103         24296 
Textbook
TTh       08:10PM-09:30PM LAB K.Davis              SCC MAIN TEC 103           
On-Campus


EDT 320    Architectural/Structural Drafting    4 Units

Prerequisite: EDT 300 and EDT 310 with grades of "C" or better or equivalent.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 108 hours LAB
Description: This course provides instruction in drafting practices involving building construction drawings and specifications and surveying practices related to construction work. This course may be taken two times for credit, provided that the software version has changed.

Schedule: Full Term, Aug 21-Dec 16
MW        05:00PM-05:50PM LEC P.Finley             SCC MAIN TEC 103         24292 
Textbook
MW        06:00PM-09:05PM LAB P.Finley             SCC MAIN TEC 103           
On-Campus


EDT 340    Plumbing and Piping Systems Design I    2 Units

Prerequisite: EDT 300 and EDT 310 with grades of "C" or better or equivalent.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC
Description: This course provides introductory level instruction in the design of water, waste, and gas piping systems for residential and commercial buildings including study of the materials, methods, codes, and practices. This course may be taken two times for credit, provided that the code version or the software version has changed.

Schedule: Full Term, Aug 21-Dec 16
TBA       TBA             LEC K.Fitzpatrick        SCC MAIN Online          26978 
Textbook
Online Class. For further information, please contact Kenneth Fitzpatrick at fitzpak@scc.losrios.edu


EDT 342    Plumbing and Piping Systems Design II    2 Units

Prerequisite: None.
Course Transferable to CSU
Hours: 36 hours LEC
Description: This course provides further instruction in the design of water, waste, and gas piping systems, for residential and commercial buildings including study of the materials, methods, codes, and practices. This course may be taken two times for credit, provided that the Code version or the software version has changed.

Schedule: Full Term, Aug 21-Dec 16
TBA       TBA             LEC K.Fitzpatrick        SCC MAIN Online          26980 
Textbook
Online Class. For further information, please contact Kenneth Fitzpatrick at fitzpak@scc.losrios.edu


EDT 350    Electrical and Electronics Drafting/Design Problem Solving    3 Units

Prerequisite: None.
Advisory: Concurrent enrollment in EDT 352.
Course Transferable to CSU, Green Course Green Course
Hours: 54 hours LEC
Description: This course involves problem solving related to electrical and electronics drafting, formula solutions, application of Ohms Law, series-parallel circuitry, basic electrical power and sizing formula, and general lighting calculations. This course may be taken two times for credit, provided that the software version has changed.

Schedule: Full Term, Aug 21-Dec 16
Th        05:00PM-06:15PM LEC K.Fitzpatrick        SCC MAIN TEC 101         27640 
Textbook
TBA       TBA             LEC K.Fitzpatrick         TBA TBA                 27640 Textbook
Hybrid Class. For further information, please contact Kenneth Fitzpatrick at fitzpak@scc.losrios.edu


EDT 352    Electrical and Electronics Drafting Design    4 Units

Prerequisite: EDT 300 and EDT 310 with grades of "C" or better or equivalent.
Course Transferable to CSU, Green Course Green Course
Hours: 36 hours LEC ; 108 hours LAB
Description: This course provides instruction in basic electron theory, electrical/electronic circuitry, drafting practices involving residential, commercial, industrial electrical drawings, material specifications, and an introduction to printed circuit board layout. Field trips to local construction projects or existing installation or manufacturing facilities may be included. Course work involves applying calculations from EDT 350 to design basic electrical power wiring, lighting, and control signal systems. This course may be taken two times for credit, provided that the Code version or the software version has changed.

Schedule: Full Term, Aug 21-Dec 16
Th        06:30PM-07:20PM LEC K.Fitzpatrick        SCC MAIN TEC 101         27642 
Textbook
TBA       TBA             LEC K.Fitzpatrick         TBA TBA                 27642 Textbook
TBA       TBA             LAB K.Fitzpatrick         TBA TBA                   
Hybrid Class. For further information, please contact Kenneth Fitzpatrick at fitzpak@scc.losrios.edu


EDT 499    Experimental Offering in Engineering Design Technology    .5-4 Units

Prerequisite: None
Course Transferable to CSU
Hours: 54 hours LEC ; 54 hours LAB
Description: See Experimental Offerings

Schedule: Full Term, Aug 21-Dec 16
Sa        08:00AM-10:05AM LEC K.Davis              SCC MAIN TEC 103         31271 
Textbook
Sa        10:15AM-01:30PM LAB K.Davis               TBA TBA                   
Beginning 3D Modeling Using Pro/E     3 Units
Hours: 36 hours LEC; 54 hours LAB
Description: This course provides an introduction to Pro/ENGINEER Wildfire 5.0 mechanical design software. Topics covered include but are not limited to: 3D modeling, parametric design, model relations, tools for creating and analyzing projects,and detail and assembly drawings.
On-Campus

Fall 2010 Class Schedule

Updated: January 10, 2011